Table of Contents
- 1 Introduction
- 2 Advantages of Best Underhood Work Lights
- 3 Best Underhood Work Lights – Types of Underhood Work Lights
- 4 Best Underhood Work Lights – How to Choose
- 5 Best Underhood Work Lights – Comparison Table
- 6 1 NextLED 1500 Lumen Detachable Rechargeable Underhood Work Light
- 7 2 Aain LT002V Upgrade Professional Underhood Work Light Bar
- 8 3 Illushine Underhood Work Light
- 9 Conclusion
Car maintenance requires a little bit of effort and you always need to right tools to get the job done. This is why so many people would rather go to a mechanic than try to repair their vehicle by themselves, even if it’s something very simple. However, there are also a lot of car owners that love taking care of their own vehicles. This is why there is a wide range of affordable tools and accessories that can help you fix your car properly.Buy on Amazon!
One of the most used car repair tools is the underhood light. These lights are specifically made to offer you a clear view of what happens underneath your car’s hood so you can fix it properly. You can find them in various models and you can even find lights that are made for sensitive eyes as well. Their job is to make your work a little bit easier by illuminating the desired area. And if you can’t afford to invest in a good set of light that won’t harm your eyes, make sure to wear protective glasses.
Underhood lights are usually designed to be easily mounted on the hood after you lift it to start working. They often look like light sticks that can even be separated into two smaller pieces. This will allow you to use the smaller piece for a closer underhood inspection. You will also be able to choose the lighting type so you’ll be able to benefit from enough lumens to illuminate the entire area. But at the same time, the lighting won’t do any damage to your eyes under long exposure. If you can’t figure out what you need, you should ask a professional.
Advantages of Best Underhood Work Lights
Conventional work lights are slowly getting out of use as they’re nowhere near as efficient as LEDs. This is because a LED light can last up to 4 times longer than traditional light. You can easily expect over 100,000 hours of performance from LED work lights. They’re also widely used because they’re much more energy-efficient and environmentally-friendly. You can end up saving up between 60 to 75% in energy costs changing to LEDs.
You will also enjoy the compact size of the LED work lights. This gives you the ability to install them in places with limited free space, where larger lights won’t ever fit. This makes them great for working under the hood of various vehicles. These lights are also known for providing all the durability and reliability you need for long-term use. LED lights are designed without any fragile parts like glass materials and filaments. This makes them excellent for work as they might experience some bumps and knocks.
Another great thing about LED work lights is that when they’re life is over, they will slowly dim over time. This will give you plenty of time to change the lights. On the other hand, a traditional work light will immediately stop working and leave you without illumination in the middle of an important job. And since they don’t contain any dangerous materials like mercury, LED lights are also a much better choice for the environment. You will also be kept safe from dangerous energy like Ultra Violet rays.
When it comes to your safety, LED lights are specifically designed not to generate forward heat while it’s operating, unlike conventional lights. This means your LEDs won’t reach dangerous levels of heat.
Best Underhood Work Lights – Types of Underhood Work LightsBuy on Amazon!
Rechargeable underhood work lights are some of the most popular types on the market. This is because they are extremely portable and can be used anytime and anywhere. All you have to do is make sure it’s always charged in case of an emergency. You can find models that are very big and can be mounted on the hood while you work. Of you can find smaller versions that are great for checkups when you notice something strange while you’re on the road.
If you want a fixed model. You can find work lights that are easily mounted into a specific position in your garage. Then all you have to do is drive right in front of you and turn it on. Most of these models are also adjustable so you can bring them closer when you work on something very small. But if you want something that you can carry in your car emergency kit, you might want to consider a small and portable model. They’re easy to charge and even easier to maneuver when it’s needed.
Another type of LED work light is the waterproof model. It’s very important for your emergency work light to be usable in any type of weather condition. But more importantly, these models are the best choice for mechanics that might need to work in times of emergencies while the weather is less than favorable. These LED work lights are usually also designed to withstand impacts and some chemicals. This makes them the perfect choice for rougher underhood work.
You can also find models with at least two different light modes. One is for minimum power, and the other is for maximum power. The brightness depends on which mode you choose.
Best Underhood Work Lights – How to Choose
Since work lights are usually designed to be portable, you might never know the environment you might have to fix something. This is why investing in a model that has an adjustable brightness is very important. The more adjusting modes it has, the better. You can even invest in a model that offers multiple modes between 2000 lumen and 10,000 lumen. This will allow you to adapt the brightness depending exactly on how much illumination you need.
You should also think about the way you want to power your LED work lights. You have two choices, corded or cordless. Since LEDs work great on both AC and DC power, you can find a wide range of cordless models that are designed with a rechargeable battery. These types of work lights are also smaller, lighter, and can be carried anywhere. LED work lights that use a Lithium-Polymer Ion battery (Li-Poly) offer a very long lifespan. Models that work on Lithium-Ion batteries (Li-Ion) don’t last as long and they’re not as safe.
Another thing you need to keep in mind is whether you’ll be using the lights in rain or not. A good LED light needs to also be waterproof and dustproof. Models that are rated IP67 are the best.
You can also find work lights with a magnetic base that allows you to attach it under the hood. Models with power banks allow you to charge your phone, and those with Bluetooth speakers let you listen to music while working. And if you need to illuminate a larger area, a tripod or stand is a great choice. You should also look for a battery level indicator.
In this article, we’ll talk about Our Top 3 Underhood Work Lights.
Best Underhood Work Lights – Comparison Table
Easy to Mount
COB LED Technology
1 NextLED 1500 Lumen Detachable Rechargeable Underhood Work Light
The NextLED 1500 Lumen Detachable Rechargeable Underhood Work Light is very bright and can offer all the illumination you need while working. It uses COB 9Chip On Board) LED technology that can provide 1500 lumen maximum brightness. More than that, it’s highly efficient and eco-friendly. Its job is to illuminate all the engine components all on its own. You won’t need any extra LEDs to get the job done. It is one of the Best Underhood Work Lights.
Thanks to the 48 inches minimum length and 77 inches maximum length, this work light is one of the longest models on the market. This retractable design gives you all the help you need to make this light fit any hood size. It has foam-cushioned protective hooks, which ensures that your vehicle’s hood won’t get scratched during the installation process.
With the detachable design, these two work lights come with their own hooks. This will give you the possibility of mounting them wherever you need. They’re also easily portable and can be rotated 369 degrees when hanging the frame. Its two lights ensure the illumination of the entries space you need to work on.
The work light also has a big battery with a capacity of 8000 mah. This offers 3 hours of maximum brightness work time and 6 hours of low brightness. And the fast-charging cable allows you to fully charge the work light in less than 4 hours. You should also keep in mind that the package doesn’t include an AC charger.
This light can be used for a wide range of jobs. This includes maintenance, camping, warning lights, and more. The high brightness is 1500 lumen and the low one is 750 lumen. And these lights work a temperature between -13F and 104F.
- Easy to Mount
- Easy to Use
- Durable Design
- Super Bright
- Highly Efficient
- Retractable Design
- Offers 1500 Maximum Lumen
- Provides 759 Minimum Lumen
- Uses COB LED Technology
- Foam Cushioned Protective Hooks
- Detachable Work Lights
- Big Battery Capacity of 8000 mah
- Has 48 to 77 Inches in Length
- Lasts 3h on High and 6h on Low Modes
- Lights Can be Rotated 360 Degrees When Hanging
- Since this model comes with two separate lights, the charging is also double. Unfortunately, both lights need separate charging cords if you need to use them at the same time.
2 Aain LT002V Upgrade Professional Underhood Work Light Bar
The Aain LT002V Upgrade Professional Underhood Work Light Bar is high-quality and doesn’t require a lot of energy to work. This makes it highly efficient in the long run and it’s always a much more environmentally-friendly option than traditional work lights. You can mount it on your vehicle’s hood while you work on the engine. This will help you see all the components even in low light conditions. And more than that, it’s a great addition to your road emergency kit as it allows you to check if something is wrong under the hood even in the middle of the night.
Thanks to its super-bright design, this light can offer 1400 lumen and allow you to work peacefully. It has 40 SMD LEDs that provide the illumination of the whole engine. But you should keep in mind that it functions while plugged in. It’s pretty flexible as it can fit hoods between 48.5 inches and 66.5 inches wide. And the retractable design makes it usable in various situations. But more than that, its ability to fold in two makes it very easy to carry around.
With its user-friendly design, this work light can be used by almost anyone without any effort. It’s made of ABS and aluminum, and it also has a robust design with built-in spring-loaded telescopic mounting brackets. And the soft padded hooks offer good protection to your vehicle’s hood every time you install the work light. This will keep the hood looking untouched even after hours of supporting the working light. And the light source can rotate within clamps so you can adjust it.
The package includes a foldable light bar, an AC/DC adapter, and a 12V car charger.
- Easy to Mount
- Very Easy to Use
- Durable Design
- Versatile Design
- Foldable Design
- The Ends Are Retractable
- Super Bright Performance
- ABS and Aluminum Construction
- Robust Design and Soft Padded Hooks
- Offers 1400 Lumen and 40 SMD LEDs
- Fits Hoods Between 48.5 and 66.5 inches
- Light Source Rotates Within Clamps To Adjust It
- Built-in Spring Loaded Telescopic Mounting Brackets
- It doesn’t hold more than two hours per charge, which means you always have to carry the charger around as well.
- Despite the fact that it doesn’t last long without a charger, it takes up to 6 hours to charge.
3 Illushine Underhood Work Light
The Illushine Underhood Work Light provides all the illumination you need to work under the hood. It’s designed with a powerful technology as it can offer 2,000 lumen. This makes them bright enough to easily check the engine in the middle of the highway, in low light conditions. This LED work light adopts the COB design, which allows it to be very even and bright without dealing with any dark areas or spots.
Thanks to the magnetic base, you can easily attach this work light to metal surfaces. This includes the roof of the vehicle, under the hood, the bumper, or any other part of your car’s body. It also offers a 90-degree rotation so you can benefit from multi-angle illumination. Its purpose is to allow you to work hands-free or use it as roadside lighting. And the hanging hooks can be rotated to 360 degrees, and more than that, the light can be hooked on an eyelet, rope, nail, or shelf.
With its rechargeable design, you can also benefit from a few hours of illumination without keeping it connected. It uses a Li-Ion battery and is made with a USB port that offers convenient charging. And since it uses COB technology, you will benefit from more light with less power used. If it’s fully charged, you might benefit from up to 5 hours of low illumination. If you need the brightness mode to be on 100%, it might last around 2 hours under full charge.
It’s also waterproof and is made of durable materials. This makes it resistant to a few knocks and bumps. It’s IPX4 water-resistant and it also prevents splashing water in all directions. And it also resists a few drops.Buy on Amazon!
- Easy to Mount
- Easy to Use
- USB Port
- Magnetic Base
- Rechargeable Design
- Powerful Technology
- Offers 90-Degree Rotation
- Two Levels of Brightness
- Adopts the COB Board Floor Light
- It Doesn’t Have Dark Areas or Spots
- The Hanging Hooks Rotate to 360-Degrees
- Slightly Expensive For Its Performance
- It doesn’t offer the best brightness experience compared to other models within its price range.
- It’s not very versatile as the magnet stops it from being installed in more awkward areas.
Finding a bright work light isn’t too hard to do. However, a good work light should also last a few hours per charge and be as versatile as possible. Only you know what you need best for your vehicle and what type of work light suits your emergency kit. This is why we included a wider range of LED work lights that can help you find exactly what you need.