Best Electric Oil Extractor – Our Top 3

Top 3-5

Introduction

Oil extractors can help you save a lot of time. You won’t have to make an appointment then wait a long time until your car is finally ready. With an oil extractor, you will be able to remove and replace the oil in your vehicle all by yourself. This means you can finally say goodbye to countless trips to the mechanic shop every time you need a minor thing fixed.

Product
 Performance Tool
 Lotyes
 THINKWORK
Image
 
 
 
Description
The Performance Tool electric oil extractor is high-end quality and is very well to use. It’s also made of good materials and it can be easily cleaned for storage.
The Lotyes electric oil extractor is almost as good as our first pick and it works great in case of an emergency. It’s pretty easy to use as well.
The THINKWORK electric oil extractor is decent as well but its quality could be better. It also extracts cold oil the slowest but it gets the job done.

Besides time, you will also be able to save money if you have your very own oil extractor. There will be no need to keep paying for a repeated service when you have an oil extractor of your own. If you’re a DIY enthusiast and love working on your vehicle instead of taking it to the repair shop every time something minor happens, there are lots of oil extractor you can choose from. You will also be able to save on service fees and markups on the engine filter and oil.

Oil extractors are incredibly easy to use and highly portable. This means you can take them with you no matter where your job is. More than that, they’re highly versatile as car engines are not the only ones that need oil changing. You will be able to use the same oil extractor on your lawn mower as well. There are lots and lots of rural equipment that need a good oil extraction job to work smoothly.

When it comes to price tags, you can find all kinds of models on the market. The simplest models usually cost under $40, while the decent ones cost somewhere between $40 and $75. And if you’re looking for bigger pumps with larger reservoirs, you can opt for the models that are pricier than $75.

How to Choose an Electric Oil Extractor

If you’re looking for the most portable model you can possibly get, you should consider a manual model. Manual oil extractors don’t need any electricity or air compressor to work. However, you will have to do all the pumping until you can use the oil extractor. This is when the suction will be able to siphon out the motor oil. Manual models are also great for people that have very small jobs and don’t want to invest in something they won’t use often enough.

A more common model is the pneumatic oil extractor. These models are also often designed to be used either manually or electrically. You will need an air compressor that is connected to the extractor. This way, you can benefit from the pressure you need for the necessary suction without putting all the work in by yourself. However, if you’re in the middle of nowhere and you don’t have any access to electricity, you can use the manual mode as a backup option.

Now let’s talk about the easiest model to use on the market, which is the electrical oil extractor. These models require a constant power source and you can only use them in situations where electricity is available. You can find models that connect to your car’s battery as well. Typically, these oil extractors are used in case of emergencies or for maritime applications. It’s recommended to make sure the pump is compatible with your car’s battery before purchasing one.

When buying an oil extractor, you should think of its portability, safety features, reservoir size, convenience, pumping speed, material, etc.

In this article, we’ll talk about Our Top 3 Oil Extractors.

Comparison Table

Product Name
Performance Tool
Lotyes
THINKWORK
Image
 
 
 
High-End Quality
Yes
Yes
No
Fast Extraction
Yes
Yes
Yes
Handles Hot Oil
Yes
Yes
Yes
Handles Cold Oil
Not Well
Not Well
Not Well
Durable
Yes
Yes
Yes
Versatile
Yes
Yes
Yes
Long-Lasting
Yes
Yes
Yes
Link
 
 
 

1 Performance Tool 12V Oil Extraction Pump

Description

The Performance Tool 12V Oil Extraction Pump is highly portable and allows you to use it in any emergency situation. It has a pretty compact design and is very lightweight. You will be able to extract and replace the oil in your vehicle within a short amount of time without getting all covered in oil. Its job is to make oil extraction a breeze and a pleasure to do. This oil extractor is designed with a self-priming 12V 5Amp DC pump. Almost anyone will be able to use it and it’s pretty affordable.

Thanks to the versatility, you can use this tool to remove oil from cars, RVs, boats, motorcycles, and a lot more. It has the capability to remove up to 3 quarts of oil per minute. The tool weighs around 2 pounds and the hoses have a diameter of half an inch. The hoses are also 2 3.5ft long and they work to extract various other things besides motor oil. This includes gasoline, potable water, etc. You will be able to use this oil extractor for a long time as it’s designed to withstand rougher work environments as well.

With the high-quality built, you can also count on it to handle hotter oils. In fact, it’s highly recommended for the oil to be at least warm, if not hot. This will allow it to flow a lot smoother than if it were cold. You should also keep in mind that it features coiled hoses. If you’re the type that hates coiled hoses, you need to know that you might have to change them if you get this oil extractor.

You will also be able to easily clean the oil extractor when it’s time to store it.

Pros

  • Easy to Set Up
  • High-End Quality
  • High-Quality Performance
  • Great Buildup and Durability
  • Very Wide Range of Applications
  • Made to Withstand the Test of Time
  • It Can Easily Remove up to 3 Quarts Per Minute
  • Great For Cars, RVs, Motorcycles, and Even Boats
  • This Pump is Very Portable, Compact, and Lightweight

Cons

  • It might be a little difficult to use for beginners.

2 Loytes Oil Change Pump

Description

The Loytes Oil Change Pump is highly-efficient and allows you to pump motor oil properly. It’s highly recommended to start up the vehicle for about 15 minutes before using this oil extractor. This is because it’s best if the oil is a little hotter, around 104F – 140F degrees.

If not, the oil extraction might work a little harder as the tool will have a lower suction power. This model is a high-quality oil extractor that completely replaces your old, manual model. All you have to do is connect it to your vehicle’s 12V battery. If the oil is warmer, the tools work faster and help save effort.

Thanks to the high-quality design, this oil extractor offers you the possibility to change the oil without dealing with any leaks or getting dirty. You won’t have to wash your hands for minutes and still not manage to get the oil out of your hands. This tool is designed to extract motor oil and allow you to get rid of it without even touching a drop of it.

The hoses and hose clams are specifically made to ensure a fast and clean oil transfer. All you have to do is install the oil extractor inlet and outlet hose, tighten the hose clamps, make sure the power clamps are connected to the battery, then simply switch the button on.

With its versatile design, this oil extractor allows you to use it on various vehicles. This includes cars, motorbikes, boats, trucks, RVs, UTVs, ATVs, and even farm and garden equipment. Unlike our first pick, this extractor cannot be used to extract water or gasoline.

The package will include an oil extractor, outlet hose, inlet hose, battery clamps, hose clamps, and a user’s guide.

Pros

  • Easy to Set Up
  • Efficient Extraction
  • High-Quality Materials
  • Great in Case of an Emergency
  • Offers a Very Clean and Tidy Experience
  • Highly-Efficient, Fast, and Works Smoothly
  • Versatile Model as it Works on Cars, Boats, Trucks, etc

Cons

  • It’s a little bit harder to use.
  • It has weak suction power.

3 THINKWORK Oil Change Pump Extractor

Description

The THINKWORK Oil Change Pump Extractor is very small and perfect for portable jobs. It also features a fairly easy-to-use design that can be used by anyone. This allows you to start extracting oil all by yourself without spending too much time getting used to the tool. It’s highly used for motorcycles, cars, scooters, boats, RVs, quad bikes, trucks, farm equipment, garden machines, etc. Be careful to set everything right before starting to use the oil extractor.

Thanks to its high efficiency, this oil extractor has enough power to get any oil extraction within a very short amount of time. The clamps are very easy to connect to the battery and then you can switch the start button ON. This allows you to perform any oil changes a lot smoother and efficiently. It’s the perfect tool to replace the traditional oil changing methods and avoid all that messy work. This tool is compact and very lightweight, which will easily allow you to get the job done no matter where you are.

With the safe operation design, you won’t have to worry about leaks or getting dirty. But you should keep in mind that using this oil extractor on cold oil is not a good idea. It’s actually recommended to start up the car’s engine for about 15 minutes before starting the oil pumping job. The temperature should be between 104F and 140F. Otherwise, you might have to deal with a clogged oil pump.

The package will include one oil pump, one outlet hose, one inlet hose, two hose locks, and two battery chips. You should keep in mind that the suction power of pump is limited. It’s also important to not connect other extension tubes.

Pros

  • Easy to Use
  • Decent Quality
  • Novel Small Pumps
  • Durable and Long-Lasting
  • Provides a Safe Operation
  • Offers a Fast and Reliable Performance

Cons

  • The quality could be better.

Conclusion

Electric oil extractors are the easiest to use as they don’t require any physical work. They’re also portable and allows you to change your car’s oil no matter where you are. This makes them ideal for emergency situations.

Leave a Reply

Your email address will not be published. Required fields are marked *