Table of Contents
- 1 Introduction
- 2 Best Car Floor Jack – Advantages
- 3 Best Car Floor Jack – Types of Car Floor Jacks
- 4 Best Car Floor Jack – How to Choose
- 5 Best Car Floor Jack – Comparison Table
- 6 1 Blackhawk B63350 Fast Lift Service Jack
- 7 2 Arcan 3-Ton Quick Rise Aluminum Floor Jack
- 8 3 Pro-LifT G-737 Grey Speedy Lift Garage Jack
- 9 Conclusion
Car maintenance is a lot more difficult than a lot of car owners would like to admit, especially if you’re a beginner. There are a lot of people that would rather take care of their own vehicle instead of spending hundreds upon hundreds of dollars each year on a professional. And to do so, everyone needs the proper tools required by the car repair jobs you’re willing to do by yourself. And since a lot of work tends to happen beneath the vehicle, most car owners that love working on their cars invest in a the Best Car Floor Jack.
A jack is a mechanical device that is used to lift various heavy loads. Their job is to securely lift whatever you need, so you can comfortably work underneath it for as long as you have to. There are mainly two types of jacks on the market, mechanical and hydraulic models. The mechanical jacks use a screw thread so they can lift heavy loads. On the other hand, a hydraulic jack uses hydraulic power.
The most used type of jack is the car jack, also known as a floor jack or a garage jack. This model is specifically designed to fit any type of vehicle, so it can lift it up to allow you to perform maintenance. And when you buy a car jack, you can easily tell them apart by their maximum lifting capacity. This includes models of 1.5 or 3 tons. And if you need something stronger, you can opt for an industrial jack that can be used to lift loads that weigh many tons.
When it comes to their price tags, jacks can easily cost anywhere from $100 to $1000, and even more. This is because of how many models there are on the market.
Best Car Floor Jack – AdvantagesBuy from Amazon!
If you’re barely starting to perform maintenance on your own car and you’re not sure if a car jack is really worth it, the short answer is, “Yes, it really is worth it!”. There are a lot of benefits to investing in a floor jack, especially if you tend to spend a lot of time in the garage. Some vehicles need more attention than others, and it’s very important to be able to work comfortably on each and every one of them.
One of the biggest advantages of a high-quality floor jack is how easy it is to be used. It barely requires any effort as all you have to do is roll it into the appropriate position then activate the lifting mechanism. Although they tend to be a little bit more expensive than a mechanical jack, the hydraulic models won’t pose a danger when you’re trying to manually raise a car that is almost as heavy as the jack’s maximum lifting capacity.
Another great advantage is the great lifting height that a good floor jack can provide. A lot of models tend to have an excellent maximum lift height of between 18 and 24 inches. This will give you all the space you need beneath the vehicle. You won’t have to struggle to properly reach some areas or work for hours in a very uncomfortable position.
Besides being extremely safe and stable, floor jacks are also very easy to maneuver. This will allow you to find the perfect position immediately. Most models use two sets of wheels of castors, and some even have a fifth wheel. All the wheels will also be capable of swiveling to 360 degrees.
Best Car Floor Jack – Types of Car Floor Jacks
Let’s also take a moment and get to know the main three types of car jacks on the market. This will allow you to get to know what you can find on the market and what suits your needs. There are a lot of types and models available, but we will only talk about the three most used car jacks in the world. This way, you won’t feel overwhelmed with too much information at once.
Let’s start with the Scissor Jack. This model is widely used all over the world thanks to its ability to be used in case of a roadside emergency. It’s very easy to carry around as it doesn’t take a lot of space and it’s pretty lightweight. You will likely see this in a lot of trunks. So if you experience a flat tire in the middle of the highway, this jack can help you change it in a short amount of time. However, the big disadvantage is that these models are mechanical.
The second type is the Hydraulic Jack that is specifically designed for garage work and repair shops. This type of jack can lift much heavier vehicles and doesn’t require much effort. However, this also means that it’s pretty heavy, and it’s not a model that can be carried around in a trunk.
And the last type is the Piston Jack, aka the Bottle Jack. It uses a concentric cylinder that makes it look very similar to a bottle. It also uses a hydraulic system and is excellent for repair shops so they can be used on trucks. However, they’re a very bad choice for sports cars or other low vehicles.
Best Car Floor Jack – How to ChooseBuy from Amazon!
There are a few things you need to keep in mind when looking for a car floor jack. This will help you choose the perfect model that will suit your vehicle and your needs. So let’s take another moment and talk about the first three things you need to consider when buying a car jack.
The first thing you need to take into consideration is the type of vehicle you will be using your future jack on. The ground clearance pays a very important role in deciding which jack to invest in. If you have a low profile vehicle, you should opt for a hydraulic jack, and if you have a truck or a similar model, a bottle jack might be the best choice. And if you’re ever in doubt, you should keep in mind that hydraulic jacks are usually suitable for most vehicles.
Another important thing to consider is the weight of your car. Your jack needs to have a higher maximum lifting capacity than your vehicle’s weight, even if the jack only lifts up to 60% of the car’s weight. Most sub-compact, compact, and midsize vehicles can be lifted with a 2-ton jack. If you own a truck, van, or SUV, a 3-ton jack might be a better choice. And if you have an even bigger car, opt for a 3.5 or 4-ton jack, or even bigger.
And the third thing you need to consider is the quality of the jack. A high-quality model is mainly made of metal and is pretty heavy. It also needs to have no leaks and operate smoothly. You might need to invest more in a high-quality jack.
In this article, we’ll talk about Our Top 3 Best Car Floor Jack.
Best Car Floor Jack – Comparison Table
Easy to Use
Easy to Maintain
Easy to Maneuver
1 Blackhawk B63350 Fast Lift Service Jack
The Blackhawk B63350 Fast Lift Service Jack is high-quality and can help you perform car maintenance much easier. It’s very sturdy and can be used for a very long time. It also features an easy-to-store design that allows you to keep it anywhere in your garage. You can use it to safely lift up your vehicle so you can do the necessary reparations underneath it.
Thanks to its built-in safety valve and vent plug, you can trust that this jack is built with all the safety features necessary. However, you should keep in mind that it’s always best to pair a car jack with some support bars when it comes to performing any reparations. This will ensure your safety in case the jack fails at the wrong moment. Although the bar is very trustworthy, you can never be too safe. This hydraulic jack is only designed to lift the vehicle, not to support it while you work on it.
With its swivel saddle, you will also be able to enjoy easy jack positioning. The saddle diameter is 4in and allows you to perform a more secure and safe lifting job. This jack has a lifting capacity of 3.5tons, aka 7,000lbs. This means that you can use it on the most commonly-used vehicles on the market. This includes midsize cars, SUVs, vans, trucks, low-profile vehicles, and much more.
The size of the jack is 28 1/2 inches long, 13 3/4 inches wide, and 6 1/2 inches high. It’s designed with a rugged universal joint that allows for precise load control. You will be able to use this jack exactly where and how you need it. This makes it excellent for car repair shops, garages, and other outdoor activities. This includes picnics and ball games.
- Easy to Position
- Durable Materials
- Increased Safety
- Reliable Performance
- Offers Fast Lifting Technology
- Can Lift up To 3.5 Tons, AKA 7,000Lbs
- Excellent for Garages and Car Repair Shops
- Has a Built-in Safety Valve and Bypass Device
- Rugged Universal Joint For Precise Load Control
- Heavy-Duty Steel Construction and Swivel Saddle
- A little bit tricky to maintain for a beginner.
2 Arcan 3-Ton Quick Rise Aluminum Floor Jack
The Arcan 3-Ton Quick Rise Aluminum Floor Jack is designed to help you perform maintenance comfortably and safely. It can lift a wide range of vehicles, which makes it a great choice for repair shops. It’s also a good option for car owners that love working on their vehicles all on their own. This model is also very easy to store and doesn’t take much space inside your garage. You will also love its easy-to-use design as it allows you to lift a car without much effort.
Thanks to its lightweight aircraft-grade aluminum, this jack is very easy to maneuver. This allows you to position it exactly where you need it to be and lift your vehicle in a short amount of time. However, although the jack can work very fast, it’s always highly recommended to lift and get down a vehicle slowly. This will ensure your safety and your car’s protection.
With its dual pump pistons, this jack can raise the saddle to load very quickly. It also has a reinforced lift arm that’s designed with increased strength, chassis torsion control, and great durability. This means you can count on this jack to help you perform maintenance on your car for a very long time. It still requires a little bit of maintenance from time to time, but it’s not very difficult once you get the hang of it.
This floor jack is designed with a rubber saddle and a foam handle bumper. Their job is to protect your vehicle while it gets lifted up and supported. The side-mount handle can help you position the jack as conveniently as possible. And its bypass and overload valves prevent the over-extension of the hydraulic ram.
- Easy to Use
- Increased Strength
- Dual Pump Pistons
- Reinforced Lift Arm
- Side-Mount Handle
- Two-Piece Handle
- Durable Performance
- Chassis Torsion Control
- Reliable Lifting Capability
- Lifting Capacity of 3 Tons
- Bypass and Overload Valves
- Lightweight Aircraft-Grade Aluminum
- Not Hard to Maneuver on a Flat Surface
- Designed With Rubber Saddle and Foam Handle Bumper
- The maintenance tends to be a little tricky for beginners.
- The wheels make the jack a little bit hard to move past small obstacles.
- Its handle is not positioned in the center of the gravity.
3 Pro-LifT G-737 Grey Speedy Lift Garage Jack
The Pro-LifT G-737 Grey Speedy Lift Garage Jack is reliable and very easy to use. It doesn’t require much strength, and it can lift a wide range of vehicles available. You can use it to safely lift up your car while ensuring that it doesn’t get damaged in the process. It uses a rubber saddle that is capable of protecting your vehicle while it’s being lifted. This makes it a very good choice for repair shops and car owners that tend to spend quite a lot of time maintaining their vehicles.
Thanks to its 3.5-ton lifting capacity, this jack can be used to lift almost any type of common vehicle. This includes vans, SUVs, trucks, low-profile vehicles, and so on. Its job is to make yours as easier as possible. This jack gives you enough room beneath the car to do your car maintenance comfortably and without any worries. And using support bars to keep the vehicle in place will give you a lot of extra peace of mind.
With its universal joint release mechanism, you will also benefit from precise control of load descent. This means you will be able to use the jack in various handling positions to get the job done and enjoying great results. And if you have any small parts that you’re scared of losing, you can easily set them in the magnetic tool tray. This will keep them around the job site for added convenience.
Its rolled side frame is designed to add strength and reduce twisting as it’s made of professional-grade materials. And the foam handle offers extra comfort to the user while pumping. With one or two strokes, you should be able to get your vehicle to the desired height.
- Easy to Use
- Safe Design
- Magnetic Tool Tray
- Pretty Durable Design
- Good Rolled Side Frame
- Good Wheels and Castors
- Reliable Lifting Performance
- Lifting Capability of 3.5 Tons
- Universal Joint Release Mechanism
- Foam Handle Provides Comfort While Pumping
- Rubber Saddle Protects the Vehicle While Lifting
- Very Heavy
- It can be a little bit too stiff the first few times it’s being used.
- The screws that are used to hold the handles together aren’t properly threaded. This means that they might come loose from time to time.
- It can be a little difficult to maintain for a beginner.
A good and safe car jack is very important for both car repair professionals and amateurs. Their job is to make lifting the vehicle as easy as possible. It’s highly recommended to use a set of support bars to keep your car in place. This will ensure the jack’s long lifespan, and it will keep you safer.